We will show you how to save money:
on the production of compressed air
Each compressed air station offers an enormous potential for conserving energy,
for example in the following areas:
- Compressor capacity utilisation
- Modern compressor technologies, e.g. speed control
- Modern control systems
- Efficient compressed air treatment, not too much, not too little
- Heat utilisation, what is it "worth"?
- Leaks: find/reduce them
- Pressure losses: localise/prevent them
- Correct component dimensions
(piping, tanks, ...) - etc., etc.
" Possible ways of producing compressed air at a reasonable price "
Practically oriented, with case studies, we make interesting suggestions, give tips and assistance regarding the correct way to handle the energy source, compressed air.
We are convinced that the costs of producing compressed air can be effectively reduced by means of minimal measures.
TACUMEN Variable Frequency Screw Air Compressors
No worry about complex electrical installation & programming.
All parts & components are assemble in factory before shipment.
Just Plug - &-Play.
The powerful intelligent controller monitor system pressure changes and control motor rpm and therefore air flow.
* Intel Drive Features
HE ( High Efficiency ) induction motor integrated VSD ( Variable Speed Drive ) . Soft start reduced drive stress & power surge.
* Multiple Machine Operation
Can operate as pressure trim machine. the power savings
achieved a single compressor is multiplied by additional savings achieved over the full installation.
* Economy of Use
Saves your money by lowering your operation cost.
These saving will continue to be delivered to your bottom line year after year.
* Best Efficiency at part-load
When operating at part-load, the performance is top in class.
The intell-driven avoids load cycling and maintain a steady state of operation, reducing operating and maintenance cost.
* Soft Start Lowers your Operating Cost
The gentle start cycle of the intell-drive increase the service life, meaning that frequent stop and restart cycles are permitted without the risk of overheating.
* High Full-Load Operating Efficiency
Class-leading performance achieved by state-of-art airend design and manufacturing processes, coupled with the reduction of internal losses, means that airend full-load performance.
Are you interested?
*****NOW ! Everyone can buy new compressor every 2 years ?????
Take Action Now !
We would be delighted if you would contact us.
According to the research between the VSD screw air compressor and a normal screw screw air compressor; there are two fields which can be display the result of energy saving; the loss of no-loading and loss of fluctuating pressure.
For example:
A 55kw screw air compressor, 70% air delivery in a year, the VSD type can save about 8,000 KWH energy.
The cost of VSD compressor can be taken back 2 years.
The figure above shows a comparison of several types of start up.
We can see that the VSD air compressor is slowly accelerating started, more stable that soft-start compressor, completely avoiding the current peaks. Variable speed screw air compressors is ideal for use in areas lacking of electricity.
* Cost Comparison
The TACUMEN VSD screw air compressor can change the motor RPM precisely according to the air consumption under stable discharge pressure. The compressor only delivers the required air, and only consume the energy to necessary compressed air. That's why the VSD type screw air compressor can save energy during the whole set of machine operation. The cost of saving energy is much higher the the cost of machine itself.
* Constant pressure air supply, with the balance of production.
The figures below show the energy consumption comparison between the general air compressor and VSD air compressor.
The VSD screw air compressor changes the rotating speed according to balance the air supply and air usage. Thus avoiding the machine frequent loading and unloading, making the VSD machine save more than 35% energy compared to normal compressor.
Stable pressure delivery controlled the pressure zone within 0.01 Mpa to 0.02 Mpa, avoid energy loss under high pressure inn the normal type air compressor.
No comments:
Post a Comment