* Expected ROI within 2 years !!!!!
*** Energy Saving in Compressors Operation !!!!!
How to save at least 20% of your Electricity cost on Your Air Compressors ?
Only New & Original Components & Parts are used to assemble our branded Air Compressors.
1.
Does your compressors produce lot of water ?
2.
Does your compressors trip regularly, especially when production is at full speed ?
3.
Does your compressor failed after routine or maintenance service ?
4.
Are your concern about Energy Cost or Energy Saving in Compressed Air Generation?
Air Compressors is the highest electrical energy consumption in any manufacturing plant !
We are in the business of helping Businesses increase their Bottom-Line, Profit or earning. in the Energy Saving in Air Compressors Operation !
NOW:
Everyone can buy new compressors every 2 years *****
***** So that your may use the saving on CSR, annual diner or Charity of your choice.
*** Energy Saving in Compressors Operation !
***** Expected ROI within 2 years *****
1.
Energy saving when operating compressors at maximum pressure. Compressor will produce compressed air from 25% to maximum of 100% ( full load ).
Meaning; if pressure need is 7 barg, we can set at 7 barg *****
2.
Saving from Compressor unload cost. It cost 30% to 60% of FLA when operating in unload mode.
The most inefficiency way to operate an Air Compressors
3.
Energy saving from Pressure band. Coat extra of 3% to 6%, for every 1 barg higher discharge pressure.
example: If you required Line pressure of 7 barg. Your compressor are require to start loading at 7 barg and off load at maximum pressure of 8 barg. ( That is the normal 1 barg pressure band ).
4.
If air demand is less the lower set point. The compressor can program to stop, Thus more energy saving.
5.
When there is demand for air ( pressure drop ), the compressor will restart, using soft start mode. Saving more from Power surge when restarting. and will has a longer lifespan for the switchgear.
Expected ROI within 2 years !
You may arrange us to visit for an assessment.
Thanks,
Regards
***** C00L or C00l *****
***** The Gas Law
P1V1 = P2V2
where;
P1 - Rated Pressure absolute
V1 = Rated Capacity ( Volume )
P2 = Actual Pressure achieve
V2 = Actual flow rate (Consumption)
Air Consumption:
Formulae:
Air consumption = Pl / (u + l )
where;
P = Capacity of compressor
l = Loading time
u = Unloading time
No comments:
Post a Comment